Description
Standard Specifications
| Floor Lengths | 16′ and 20′ |
| Outside Width | 6’11” |
| Inside Height | 6’6″ (7′ optional) |
| GVWR | 16′ – 10,000 lbs; 20′ – 14,000 lbs |
| Axles | Rubber torsion ride (grease packed bearings); 102″ wide – (2) 5,200# axles on 16′ – (2) 7,000# axles on 20′ |
| Wheels | 16″ × 6″ Heavy-duty steel, 8-lug |
| Tires | (4) ST235/85R16 steel belted radials, load range E |
| Brakes | 12″ × 2″ Electric on both axles |
| Safety Equipment | Two chains and electronic break-away kit |
| Nose | .050 pre-painted aluminum smooth sheet sides and front |
| Coupler | 2 5 /16″ Ball coupler (20,000# ball rating) with steel hitch post section and aluminum front gusset, adjustable height |
| Side Wall | Extruded aluminum slats welded to 1″ × 3″ aluminum tubes, spaced no more than 18″ on center. Choice of slat patterns. 8″ openings are notched for optional closures. |
| Floor | .125 flat aluminum diamond plate |
| Side Door | 33″ Wide, curb side escape door |
| Rear Door | Full-swing with (2) 4″ extruded aluminum offset hinges for extended swing radius; 32″ sliding door on roadside |
| Roof Sheet | One-piece .040 aluminum |
| Partition | Center divider with outside release slam latch |
| Lights | LED inside and out; 12-volt D.O.T. approved |
Standard Features
- LED clearance lights
- Cast aluminum front and rear corners
- Low-step rear door
- Fully framed and full-height side door
- Heavy-duty 12″ extruded aluminum bottom rail
- Dexter torsion ride axles
Popular Options
- Spare tire
- Plexiglas closures
- EBY hubcaps
